Vintage GUITAR, ORGAN and Hi-Fi Speakers - 2" to 15"
For Correspondence: PLEASE REFER TO ITEM# NUMBERS !
• MIDI Music Production Station
• MIDI Merger
• MIDI Filter
• MIDI Drums
• 12AU7 Tubes
Other Equipment:
•Vintage Organs
• Leslie speakers
• Classic Hammond Organs
• Vintage Recording Equipment
• Vintage Turn Tables / Record Players 16 - 33/45 -78 RPM
• Turn Table Parts +Accessories
• Electronic Repair Parts
• Tube Parts
• Tube Amplifiers
• Recording Equipment
12" Guitar / Organ Speakers - Vintage US made - Cleveland. Jensen, Oxford, Rola, Utah
(Other Sizes than 12" > See below!)
©2006, 2008 ultraelectronicactive.com - image also availalbe in large print resoltiion and can be licensned in various sizes - inquire
12" Vintage Guitar / Organ Speakers -US manufactured:
These come from the golden age of vaccum tubes when output power was scarce. Most of these are high efficient speakers, which means that little power is needed to bring out considerable volume and quite a bit of detail. The desirable of vintage guitar speakers is also non linearites in fruequency response and resonance frequencies as favoured by many guitar players. So: To be used with vintage amplifiers in the 10 to 30 W range. The below listed power capacity is an estimate based on hooking them up. I do not have data on any of these speakers. To use these speakers with higher powered amplifiers (if not several speakers are used to distribute power among them), is likely to destroy them.
All speakers were tested and swept with a sinus wave tone generator to detect potential problems, but do to age, are sold "AS IS"
Please note: SHIPPING CHARGES are as calculated by size and weight are $12-$19 for 1 speaker and $15 - $26 for 2 speakers to most locations in the USA. I will weight each package for before shipping and get the actual shipping charge. If the shopping cart calculates a different amount, that simply means, that I will have to make adjustments before I can ship: bill you the additional charges or refund. International shipping is considerably more and even more likely to be miscalculated. So: If needing exact shipping charges prior to purchasing, please Inquire about shipping charges for the speaker(s) you are inteested in.
ONE OF A KIND ITEMS - Only one availalbe each. Please: Order only only one per shopping cart button - All speakers I have are listed here! Overpayment will be refunded. Actual item shown in each picture. In quire for larger images, if needed.
I will update and remove payment links for items no longer available as they sell.
Very Important: Please READ! I tested each and every one of the speakers to be working, but I do not warrant that they will work as a direct replacement for what you intend to use them for. If in doubt: Please check part numbers / frame nubers as given below to match what your need exactly, as these speakers are NOT RETURNABLE!
| Type | Description | Ohms: | Power | Price, EACH | |
| #1 | 12" Cleveland Speaker, Date of manufacture: 37th week of 1965. Numbers printed on basket / magner: 433537. Other numbers sprinted on the speaker magnet: 58103-2. Magnet: Alnico, Dust Cap: Felt center cap (condition: dust cap has a couple of holes.) Identical to #2 - buy both for a matched pair! Item#: 12-1 |
8 | 30 W | 1 1967 Clevelnad 12" speaker >>>Make Your Own Price<<< |
|
| #2 | 12" Cleveland Speaker, Date of manufacture: 37th week of 1965. Numbers printed on basket / magner: 433537. Other numbers sprinted on the speaker magnet: 58103-2. Magnet: Alnico, Dust Cap: Felt center cap (condition: Centercap perfect.) Identical to #1 - buy both for a matched pair! Item#: 12-2 |
8 | 30 W | 1 1967 Clevelnad 12" speaker >>>Make Your Own Price<<< |
|
| #3 | 12" ROLA Speaker (has label on magnet: "CONN custom Speker by ROLA"), Date of manufacture: 42 rd week of 1976. Numbers printed on the speaker basket are: 2857642, L058102-007 and 28296. This psekaker apears quite sensitive and to be designed for lower output power: my estimate is 15W Item#: 12-3 |
8 | 15-20W | 1 1976 ROLA 12" speaker >>>Make Your Own Price<<< |
|
| #4 | 12" Oxford Speaker, Date of manufacture: 41 tst week of 1965. Numbers printed on the speaker basket: 465-541, and on the magnet: 33-5042-6. Magnet: Ceramic; Speaker model number: 12J4-11.The cone of this speaker looks like in mint condition. Item#: 12-4 |
8 | 20W | 1 1965 Oxford 12" speaker >>>Make Your Own Price<<< |
|
| #5 | 12" Oxford Speaker, Date of manufacture: 11 th week of 1957. Numbers printed on the speaker basket: 465-711, and on the magnet: LC53. Magnet: Alnico; Dust Cap: pressed card board; Speaker model number: 12JB-22.The cone of this speaker has a small smudge (shown in above picture) and a well repaired small tear. The speaker appears to work fine and appears very sensitive and produces a lot of volume with little output power. Item#: 12-5 |
8 | 20W | 1 1957 Oxford 12" speaker w/ Alnico Magnet >>>Make Your Own Price<<< |
|
| #6 | 12" Oxford Speaker, Date of manufacture: 41 st week of 1962. Numbers printed on the speaker basket: 465-241, and on the magnet: OXC12A611A. Magnet: Alnico; Dust Cap: pressed card board ABOUT 1 1/4" diameter; Speaker model number: 12JB-77.The cone of this speaker is perfect. The speaker appears to work fine and appears very sensitive and produces a lot of volume with little output power. Identical to #7 - buy both for a matched pair! Item#: 12-6 |
8 | 20W | 1 1962 Oxford 12" speaker w/ Alnico Magnet >>>Make Your Own Price<<< |
|
| #7 | 12" Oxford Speaker, Date of manufacture: 41 st week of 1962. Numbers printed on the speaker basket: 465-241, and on the magnet: OXC12A611A. Magnet: Alnico; Dust Cap: pressed card board ABOUT 1 1/4" diameter; Speaker model number: 12JB-77.The cone of this speaker shows light signs of fine splash marks of liquid drops, but otherwise is perfect (likely can be brushed of, not very noticeable). The speaker appears to work fine and appears very sensitive and produces a lot of volume with little output power. Identical to #6 - buy both for a matched pair! Item#: 12-7 |
8 | 20W | 1 1962 Oxford 12" speaker w/ Alnico Magnet >>>Make Your Own Price<<< |
|
| #8 | 12" Oxford Speaker, Date of manufacture: 43 rd week of 1958 (possibly '68, bit I don't beleive so). Numbers printed on the speaker basket: 465-843, H708813, P, Magnet: Alnico; Dust Cap: pressed card board About 1 1/4" diameter; Speaker model number: 12JB-49.The cone of this speaker is perfect. The speaker appears to work fine and appears very sensitive and produces a lot of volume with little output power. Item#: 12-8 |
8 | 20W | 1 1958 Jensen 12" speaker w/ Alnico Magnet >>>Make Your Own Price<<< |
|
| #9 | 12" 1951 "Cltetron" (Cleveland) Speaker w/ label on Magnet: "Cletron (logo) V.C. 3.2 Ohms, Field: 4.64 OZ., Model: PM 12H, Date of manufacture: 41 st week of 1951. Numbers stamp on the speaker basket: 433-141, Magnet: Alnico; Dust Cap: grey felt - about 1 3/4" diameter; Speaker model number: PM 12H. The cone of this was perfect but when cleaning I knocked a hole with the air nozzle into the cone. There was another small hole. both defects I have patched from behind with contact cement. The speaker appears to work fine and appears very sensitive and produces a lot of volume with little output power. Item#: 12-9 |
4 | 20W | 1 1951 Cleveland 12" speaker w/ Alnico Magnet >>>Make Your Own Price<<< |
|
• Also available: Vintage Tube Amp Repair, Restoration and Modification •
| Type | Description | Ohms: | Power | Price, EACH | |
| #10 | 12" 1950 Cresent Speaker w/ red label on Magnet: "Capehart Speaker Made in the USA", Date of manufacture: 21 st week of 1950. Numbers stamp on the speaker basket: 150021, 120AT5, R-81192, Magnet: Alnico - appears lager / heaier than average and there is a mountign brakket for an output transformet s[otwelded t the magnet; Dust Cap: grey felt - about 1 1/2" diameter; Speaker model number: 120AT5. The cone of this appears slightly wavery but looks good. The voice coil of this speaker appears to rattle somewhat, so may need soem work / recone. Item#: 12-10 |
4 | 30 W | 1 1950 Cresent 12" speaker >>>Make Your Own Price<<< |
|
| #11 | 12" 1940's General Electric Speaker. The outer diameter of this speaker is slightly larger than14". The cone is about 12". There is a bell mounted to the magnet of this speaker by 4 sprews, which carries a large embossed General Electric logo. I have not taken it off so have not seen the actual magnet. Exact date of manufacture: unknown. There is only one number stamped on the basket: HS14A. (presumably the model number) Currently untested, but will add results when I get to it. Item#: 12-11 |
4 | 30 W | 1 1940's General Electric 12" (14") speaker >>>Make Your Own Price<<< |
|
| #12 | 12" UTAH Speaker with built-in 3" Alnico tweater (can be connected / switched off separately - the hook-up terminal provides 3 prongs!), Date of manufacture: 5tth week of 1968. Numbers printed on basket: 329805, 180-010. Magnet: Ceramic, Dust Cap: pressed card board, concave Item#: 12-12 |
4 | 25W | 1 1976 ROLA 12" speaker >>>Make Your Own Price<<< |
|
| #13 | 12" Jensen P12S Speaker, Date of manufacture: 16 th week of 1950 Numbers printed on the speaker basket: P12S C5184 3. Printed on the magnet: 112A,490 A, and 3586 2 on the inside of the cone. Magnet: Alnico, The speaker is all original. The cone appears in perfect near mint condition and has a felt center dust cover about 1 1/2" in diameter. Instead of the usual layered cardboard flange for mounting , this speaker has no pressed card board and was mounted with rubber grommets (larger holes in basket. Mount from front ot add gasket material for solidly mounted applications. Item#: 12-13 |
4 | 20W | 1 1950 Jensen 12" speaker >>>Make Your Own Price<<< |
|
| #14 | 12" Jensen P12-RJ Speaker, Date of manufacture: 19 th week of 1961. Numbers printed on the basket of this speaker: P12-RJ,C7198, 7198, printed on the magnet: P8464-1 and 220119. Magnet: Alnico, The speaker is all original and has a felt center dust cover. Item#: 12-14 |
16 | 20W | 1 1961 Oxford 12" speaker >>>Make Your Own Price<<< |
|
| #15 | 12" Jensen P12QL Speaker. This is the high powered version of this speaker rated at 40W. Date of manufacture: 50 th week of 1957 by the Chicago plant. Numbers printed on the basket of this speaker: P12QL C6268, 708801, printed on the side of the magnet: 62698 and on the other side embossed: Q-10; printed on the inside of the cone: 2194-2H. Magnet: Alnico (large!), The speaker is all original and has a 2" pressed card board 2" dust cover with felt covered center vut-out. The cone of thsi speaker is perfect near mint condition. The paint on the basket has spots where it is slightly blemished, but overall in very good condition. Item#: 12-15 |
8 | 40W | 1 1957 Jensen 12" speaker w/ Alnico Magnet >>>Make Your Own Price<<< |
|
| #16 | 12" Jensen C12 PS Speaker. Date of manufacture: 37 th week of 1963. Numbers printed on the basket of this speaker: C12 PS, C7468 C6268 2, 220337, printed on the magnet: 65101 1; printed on the inside of the cone: 3012B14-H3. Magnet: Cermic, The speaker is original and has a 2" black felt dust cover. The cone of this speaker has glue drops at 3 areas of the cone. Thepaint on the basket has spots where is in very good condition. Item#: 12-16 |
16 | 20W | 1 1963 Jensen 12" speaker >>>Make Your Own Price<<< |
|
As To PRICES: "Make your own price" means to tell me how much this speaker in the described condition is worth you you. As a general guide: due to the amount of time it takes to find, buy, remove, clean, test, photograph, edit, describe and list these speakers here, the minimum for a single vintage speaker equal or larger in size to 6" should not sell for less than $35.00. I give volume discounts that increase in depth: the more items are purchased in one order, the greater the discount, AND I will be generous to those who spend money with me! Among my listed speakers there are several speakers that are rare and hard to find, and due to it, are worth much more than $35. Obviously I am not giving these away! So if unsure, carefully research how much a similar speaker to the one you need, is selling for (If unsure, call your guitar amp repair shop to get the price of an vintage original speaker!) to get a clear understanding about it's value. Then submit to me what it is worth to you. As said: I will respond with either "Sold!" or "NOPE" My goal is to sell these speakers to those who need them at FAIR PRICES - fair to both of us, but I won't waste time with haggling, bickering or unfair offers. It's a one shot deal: SOLD! I don't have the time for anything else. - Simply said: What you deem a fair price and how much you are willing to spend, to get that speaker (a "take it or leave it" offer!). |
|||||
15" Vintage Zenith Alnico Speakers
- Matched Pair
Description: These are vintage 15" speakers labelled as "Zenith" These feature Alnic Magnets and folded Accordian Surrounds. Perfect for vintage Hi-Fi Consoles but also great in low powered bass cabinets.
•Features: 8", fabrik surround, alnico magnet
Condition: Good condition and fully working. Somewhat dusty
tLot: 2 Speakers avilable.
Item#: 15-1A+B
Price:>>>Make Your Own Price<<<
FOR each speaker, or for the pair!
