Vacuum Tube Electronic Chasis + Parts

• Vintage Audio Equipment+Parts - OVERVIEW • FIND-ALL Available Items • UEA Home •

Repair parts for vintage and obsolete audio equipment
- A few words first on how to get what you need:

• CONTACT ME

• Tube Amplifiers

• Vintage Radios

• Electronic Repair Parts

• Tube Parts

• Vintage Turn Tables / Record Players 16 - 33/45 -78 RPM

• Hi-Fi Stereo Turn Tables

• Record Changers

• Record Players

• Vintage Speakers

Other Equipment:

• VIntage Recording Equipment

• Vintage Synthesizers + keyboards

• Classic Hammond Organs

• Effects Processors

• MIDI GEAR

To order parts by manufacturer, model and part number may be normal and feasible for equipment, that still is in production, but this does not help at all for vintage or obsolete audio equipment, nor for obsolete parts! Please use primarily descriptive information instead!

Audio equipment that has been made in the 1950’s is now approaching 60 years of age and likely it’s parts have been discontinued for almost that long and are obsolete. Equipment that has been made in the 70’s approaches 40 years in age and at least 30 years of obsolecense! - That is a long time!

Six decades of audio equipment history likely has produced hunderts of thousands of models, each using different parts, so the sad reality is: likely the exact part needed cannot be located and won't be available. Pulls of used parts from used similar equipment or similar parts form completely different equipment, modifications to the part or the equipment may be the only items available! Thus: No warranties of any kind!

In order to find replacment parts for obsolte equipment, desrciptive data will be required primarily, such as a photo, technical measurements and detail data, instead of part numbers, model numbers, or serial numbers, which are secondary.

For a needed potentiometer this may be expressed in: how many potentiometer layers, physical size and dimensions, electronic values and if it has loudness tabs and where, what type of potentiometer, etc. Succesful inquires for parts therefore should include what exactly the part is, and where or what the part is used for.

“I need a 250 K linear stereo ballance potentiometer with an 8 mm knurled shaft, 24 mm mounting depth, with solder lugs and center loudness tabs” gives me more detail to find you the needed part than: “I need a potentiometer part number #14576822 for a GE Stereo Multiplex Model B233, serial number: K14049”

Got it? --> PLEASE INQUIRE BY DESCRIPTION!

Ways to Purchase / Inquire about Parts form me:

1) UNASSISTED PARTS PURCHASES

2) ASSISTED PARTS PURCHASES

- Detail : See next column ot the right ---->>>

Ways to Purchase / Inquire about Parts form me:

1) UNASSISTED PARTS PURCHASES - simply use the Paypal shopping cart on my web site to purchase any listed item at the price as shown. If your part is not available or not found, you can inquire about it (see below: TO INQUIRE FOR PARTS), for which I won’t charge a processing fee. If I beleive to have parts that possibly could match your inquiry, I will point you to where listed on my web site, or I may newly list parts, that fall within the parameters of your description available for purchase via the shopping cart on my web site; AND then I will notify you by e-mail with the URL for the listed parts in response to your inquiry. ALSO: Generally: I give DEEP DISCOUNTS, if more than one part is purchaed in one order! There will be no additional service / processing fees for unassited purchases, but anything more than answering your first inquiry e-mail, falls into the category of ASSISTED PARTS PURCHASES (below!).

2) ASSISTED PARTS PURCHASES, which require personal interaction with me: Genrally I charge a $25 non-refundable processing fee for interactive parts assistance, or a minimum of $35 total for each assisted parts purchase case, to recover payment for my time. The first available part will be $35, (or more depending on the cost for the part, - and any additional parts purchased in the same order may be discounted as much as possible, resulting in: $25 if no part is available, or $35 total, if part(s) are availalbe to be purchased and parts costs do not total more than $35.
NOTE: Due to the nature of obsolete vintage audio equipment and it’s obsolete parts: There are NO warranties expressed or implied, that I may be able to help, nor that I have or can provide the needed part, nor that parts that I may have, will work. What the processing fee pays for, is for my time only, to review your materials, search my stock, equipment, or parts sources, and to answer your inquiry. Although: All of my efforts will focus to aid to the best extent possible for a soltion to provide parts to get your equipment working again! - Applying more than 25 years of experience! AND: I may share any information that I may have, including where to potentially find it, if I don’t have it. (See DETAIL below!!)

TO INQUIRE FOR PARTS: Inquire for the needed part by description. For your inquiry to be successful, please make sure to provide the all information that I may need to determine if I have your needed part, or if can help. The information to provide should linclude: What exactly the part is, what used for, where it is located in the circuit, all details about the part, such as physical dimensuions, electronic values, technical details, other details, and the make and model of the equipment. Ideally send me a photo of the needed part (less than 100 Kb (< 0.1 Mb) in size only! -resize in camera, or edit before uploading!!! - Otherwise: a definite “no-go!” and inquiry ignored!). I will review any succesful inquiry with your materials. If I have parts that fall within the parameters of your description I may list these parts for purchase on my web site and notify you by e-mail with the URL for the listed parts. I will also tell you either: “Sorry, I can’t help“, or: if I possibly could provide further information, photos, etc., or potentially workable parts: to simply let you know about these facts without going into detail. There won't be a processing fee to process your first inquiry e-mail up to this point, but: Anything more in additon falls into the category of ASSISTED PARTS PURCHASES (see above!)

ASSITED PARTS PURCHASES (The process and what you will receive - Detail):

If needing additional correspondence / asistance after the first inquiry e-mail: I will require payment of a $25 non refundable processing fee, prior to reviewing further details of your inquiry (see above: ASSITED PARTS PURCHASE). I will attempt to provide any of the following, if and as available:

1) Information on available parts, that potentally may work: If I have the needed part, I will e-mail you a photo and quote you the price for it, with shipping charges to your destination, so please care to include your ship-to ZIP code. In the event of a purchase: your paid processing fee will be credited towards the purchase of the part, where a total of $35 is my minimum for each assisted parts purchases. And payment of the remaining balance, including any of the shipping charges will have to have posted to my account, before your item can ship.
2) Detail information: If I don’t have the exact part, but parts that potentially may work or can be modified: I will e-mail you a photo of parts that may possibly match your part to some extent, for you to decide what will work best for you. There will be also the possibility, that none of my suggestions may work!
3) Further Detail information and follow -up: Upon further request I will e-mail further descriptive data, for parts that may work, such as more detail photo(s), physical or electronic measurement data
4) Information on how to repair without a direct replacement part: suggestions on how to repair / refurbish the original part, on on how to substitute the needed part with a simmilar part, should I have or know of a suitable replacement, if I don’t have a suitable part, that will work. -within the time frame of a parts inquiry ONLY! (See below! "While I will make...")
5) Alternatives: refferences on where to possibly find the needed part or information form other sources, likely in form of a URL for a web site, an e-mail address or a telephone number of a company or person to cotact, who may be able to provide the information, a part or services to refurbish it.
6) Sharring Knowledge: Information about how I substituted succesffuly with other parts or modified the equipment to work with other parts, or repaired a similar problem. Other repair advice, or pointers as available - but only within the framework of a part inquiry withotu additional payment.

While I will make any possible effort to help and share information that I know of, or have availalbe in above listed detail: I canot guarantee a satisfactory answer, nor that my answer will bring the desired results, and also may limmit my assitance to the amount of time your processing fee has paid for (Yes, I probably could write a long and illustrated book in great detail, for example on “how to restore a vintage record changer”, but not for a $25 fee, that is ment to to spend about 20 minutes of my time!
No warrantees or guarantees of any kind expressed or implied: There are too many variables to make warranties of any kind! (The concept of “warranty” simply does not work in the world of obselecense and for used parts that were pulled form other aged equipment!) Although: I will make any effort to help as best as possible and will describe all known as acurately as I possibly can!

• Parts ready to Purchase / Listed parts -> SEE BELOW! • Contact Me

• Buy • Top • Garage Main • Listen to Music by Rising Star • Home • Web Design by Rising Star •

Obsolete and Hard to Find Repair Parts for Vintage Audio Equipment and Vintage Computers

Parts:

• Vaccum Tubes

• Turn Table Parts

Other Equipment:

•Vintage Organs

• Leslie speakers

• Classic Hammond Organs

• Vintage Recording Equipment

• Microphones

• Vintage Effects Processors

• Vintage Turn Tables / Record Players 16 - 33/45 -78 RPM

• Turn Table Parts +Accessories

• Electronic Repair Parts

• Tube Parts

• Tube Amplifiers

Parts are available for below listed machines. Each describes what parts are available and which are not.

All parts for these machines are used pulled quality parts in good and working condition, if not noted otherwise . Some parts, such as knobs, may be compatible with several models. Please check for simmilar models. Machines not shown here are not avilable . For most parts, please inquire by description. I will give you availability information, a quote for the parts you need, plus order and payment information. Please care to include your ship-to ZIP code, so that I may calculate your shipping charges for the total of your order. $25.00 Minimum Order for items not listed in the Paypal shopping cart system - Great discounts apply and packakge deals given for the purchase of several parts.

• Vintage Audio Knobs • Vintage VU-Meters and other Meters • Cassette Decks • Computers • Organs - Tube • Reel to Reel Decks • Stereo Receivers - Vintage • Vintage Tube Equipment • Synthesizer + Samplers • Turn Tables • Tube Amplifier Transformers and Chokes • Vintage Radios • PowerChords / AC -Cables •

Cassette Decks - Professional

UHER CR-124 / CR-134
Portable Pro Deck

-Not available: Body parts, some mechanical parts, speaker

-Available: Motor assembly, Heads, Pinch rollers, Audio Output IC, Audio amplifier module, Mic Pre-Amp module, VU-Meters, etc...

For a complete list of all available UHER parts, also for other portable machines and to buy parts and accesories click here

Computers, Vintage

Vintage SCSI cables + Monitor Cables

Organs, Vintage - Tube:

Organ Keys + Piano Action Parts have moved to HERE!

Vintage Tube Equipment Parts

•Has moved to here: Tubes • Output Transformers • Knobs • Power-Transformers

Reel to Reel Decks:

Akai X-1800SD
7" Reel to Reel Recorder AND 8 Track cartridge recorder.

AKAI X-1800SD, Main Drive Belt / Capstan Belt
SALE --- $9.99 each !.

Pretty much ALL Parts avail.
Actuator levers "pot metal" parts HERE!. Pitch Conversion Sleeve HERE!.
-Not available: Reel holder rubber caps

INQUIRE by description. I even have a the lid for the woden case!

Akai X-2000SD
Combination unit: 7" Reel to Reel Recorder, 8 Track cartridge and Compact Cassette recorders.
ALL important Parts available (If a part you need is not shown: please inquire )

Large Detail Picture -Click here!

Payment links will be deleted as parts sell.- Page is current as to what is avaialable. Substantial discounts will be given, if buying more than 1 part. Discounted prices for 10-50% off. The more parts you buy in one order, the deeper the discount! Discount will be refunded after payment has been made at regular prices if purchasign with the shopping cart as below. If wanting to know totals / discount before purchasing, please inquire for the needed parts. Will respond with a total including discounts and shipping charges. After you okay the order I will send invoice with payment instructions. All parts used in good condition, Machine was tested before the machine was parted out.
Foreign buyers please inquire: The paypal shopping cart likely miscalculates the shipping charges. Please do not purcase with the shopping cart, as likely I will have to make adjustments before I can ship - instead: Inquire to purchase!

Availalbe Parts: (refer to numbering in above photo)

1. AKAI X-2000SD Front panel, top, good condition, could use a cleaning though. Alluminum Panel with track indicator leses only, nothing else included. 1 availalbe. $ 39.00

2. AKAI X-2000SD Front panel, bottom - for amplifier, good condition, could use a cleaning though. Alluminum Panel only, nothing else included. 1 availalbe. $ 25.00
3. AKAI X-2000SD Power supply, complete assembly, includes: power transformer, PCB, Power chord, connectors, etc. 1 availalbe. $ 45.00
4. AKAI X-2000SD Capstan / Main Motor Assembly, complete and assembled, includes: motor, pulley, mounting assembly, capacitor, Capacitor PCB, Resistor, microswitch, speed switch (wired up!), connector, etc. - the complete assembly to drop into the unit;1 availalbe. $ 55.00
5. AKAI X-2000SD 8 Track player/recorder assembly, complete assembly - refurbished!, This part was completley refurbished and has low mileage heads in good condition in it. Drop a complete replacement into your unit. Only may need head fine calibration. Includes: heads, tape sensor, track advance mechanism, electronics PCB, connector, switch and microswitch, etc. 1 availalbe. $ 65.00
6. AKAI X-2000SD Head assembly for Reel to Reel deck, complete assembly - Assembled - one part. Includes: Al tape guides, REC/PB head, Erase head, Bias head - all on mounting plate, track selector assembly with knob and chanel selector swtch, bias trap coils and connector assembly. May need head adjustments, but it ready to be dropped into your machine. Heads good condition - show wear but have life left.1 availalbe. $ 115.00 I have also separate heads from another machine availalbe - Please Inquire. BUY COMPLETE ASY as above described:
7. AKAI X-2000SD Speakers. size: 4" , removed form AKAI X-200SD, but also will work in other AKAI amplified tape machines, such as the X-1800SD. Used. Signs of age and use. 2 availalbe, sold as 1 each. $ ~~15.00~~ SOLD OUT!
8. AKAI X-2000SD Head Cover, covers the heads of the Reel to Reel section of this deck. alluminum, black, has some corossion, but overall looks good; 1 availalbe. $ 15.00
9. AKAI X-2000SD Center Cover, removable, covers the tape counter, black, plasric, good condition; 1 availalbe. $ 8.00
10. AKAI X-2000SD Trim, used in tape compartmen, black, plasric, good condition; 1 availalbe. $ 8.00
11. AKAI X-2000SD Meter Assembly, 2 needle / 2 chanel one-unit Vu meter stereo , good condition. The paint on th eneedles is brilltle, but the meter functions and looks good.; 1 availalbe. $ 35.00
12. SOLD! No longer available.
13. AKAI X-2000SD Suppy reel hub assembly - complete, This is the complete assebly to which the supply reel would be mounted. has: tape reel lock,, o-ring, clutch, mounting plate and rear pulley; This would be mounted on th erignt side of the tape deck. 1 availalbe. $ ~~35.00~~ SOLD OUT!

14. AKAI X-2000SD Take-Up reel hub assembly - complete, This is the complete assebly to which the take-up reel would be mounted. has: tape reel lock,, wind surface, clutch, and the mounting ; This would be mounted on left hand side of the tape deck. 1 availalbe. ~~$ 35.00~~ SOLD OUT!
15. AKAI X-2000SD Transfer Idler wheel, Solid black plastic, drive surface rifled, brass center bushing 2 availalbe (only 1 shown), This pasrt is used in a variety of single motor AKAI decks, such as the X-1800SD or the 1700W and other models; sold: 1 each. $ 12.00 ea.
16. AKAI X-2000SD Idler weel, used for winding fuctions of the reel to reel section, Solid allimunium, drive edge rubber coated, brass center bushing 4 availalbe (only 2 shown), This pasrt is used in a variety of single motor AKAI decks, such as the X-1800SD or the 1700W and more models; sold: 1 each.
$ 15.00 ea.

Reel to Reel Decks (-Continued):

Ampex Power Chords

For the rounded 2 pin AC connector as shown above - used in Ampex 1250 machines, or 620 + 2010 speakers and other vintage Ampex gear. Used, tested, compatible. Type, length and color may varry. Please Check above photo for compatibilty with your machine! Purchase This cable, or other odd, hard to find or obsolete Power chords / AC cables and connectors HERE!

Reel to Reel Decks:
(AKAI X-2000SD Continued)

17. AKAI X-2000SD Tape End Sensor w/ tape guide, used to sense when the tape is at an end, and it operates a microshwitch to turn the machine of. You may have to replace yours if bent. This one is in excellent condition and sraight. 1 availalbe.
$ 9.00
18. AKAI X-2000SD Tape Lifter w/ tape guide, used to lift the tape from the heads when the machine is winding to prevent unnecessary head wear. You may have to replace yours if bent. This one is sraight. 1 available.
$ 8.00
19. AKAI X-2000SD Reel brake arm with rubber pad, used to brake the tape reel after winding functions. Unfortunately I do not rmemeber which goes on which side. Look at your machine to identify the part you need. Some wear, but works well. 1 available.
$ 12.00 20. AKAI X-2000SD Reel brake arm with rubber pad, used to brake the tape reel after winding functions. Unfortunately I do not rmemeber which goes on which side. Look at your machine to identify the part you need. Some wear, but works well. 1 available.
$ 12.00 21. AKAI X-2000SD Power Switch, Main power switch, includes: 0.039 uF + 120 Ohm 500V integrated capacitor, and it includes the push button (as shown). 1 availalbe.
$ 15.00
22. AKAI X-2000SD Tape Counter, 4 digit with reset button, 1 available.
$ 15.00
23. AKAI X-2000SD Potentiometer, level and tone controls in one pot. This is a 3 layer double shaft potentiometer: The inner shaft links 2 layers: 2 x 10 K Ohm A, The outer shaft controls the 3 rd layer with a 100 K Ohm B pot. 2 available, sold as: 1 each. $ 35.00 ea. (discount applies, if buying both, see top)
24. AKAI X-2000SD Output Amplifier IC, Sanyo STK-011, 10 pin. This is a truely vintage output amplifer IC, that is obsolete, as it's production has been long dicontinued. Get these while still availalbe! The part was pulled form the X-2000SD but likely is used in othe raudio equipment as well. 2 available, sold as: 1 each. $ 45.00 ea. (discount applies, if buying both, see top)
25. AKAI X-2000SD Pinch Roller COVER / Tie Down. This part has an integrated screw so that only 1 part ise needed compated to older models. Alluminum, balck. Likely compatible with other AKAI models of the same vintage as well. 1 availalbe. $ 15.00
26. AKAI X-2000SD Ball Bearing. Part of the entrance tape guide - steel ball bearing. As the tape comes from the supply reel it enters the tape path by running over this bearing. Likely compatible with other AKAI models of the same vintage as well. 1 availalbe. $ 15.00
27. AKAI X-2000SD Pitch Conversion sleeve. This is the famous highly saught after pitch conversion sleeve, which alwyas seem to have gotten lost on many AKAI recorders. This part allows to change operating speeds of the reel to reel deck from 3 3/4 IPS to 7 1/2 IPS. Used by many AKAI models including the X-1800SD, 1700, and compatible with almost all machines that use conversion sleeves. Only 1 availalbe - Get it before someone else will!
$ 49.00
28. AKAI X-2000SD Pitch Conversion slleeve holder. This holder stores the pitch conveersion sleeve safelt on the front panel of the machine. A perfect replacment, if on yours the bin is bent, or th esrping is broken off. Used by many AKAI models,and compatible with almost all machines that use conversion sleeves. 1 availalbe
$ 12.00
29. AKAI X-2000SD Pot Metal Cam - Play/Stop. This part is commonly also referred to as: pot metal parts, bearings , engagement lever/shaft boss, cast puter part, bushing, or aluminum rocker part, that is on the shaft of the knob. This particular part is the primary cam for the play lever. On many AKAI machines this part gets brittle and eventually shatters leaving the machine unoperable. Many people had to junk their AKAI decks due to parts obsolete, and as this part fails on about 50% of the machines, it is highly saught after. Only 1 availalbe - get it before some one else will! These parts are geting scarce. Dicounted pricing offered when ordering more than 1 part - see top of X-200SD.
$ 75.00
30. AKAI X-2000SD Steel Ball. This steel baal sitts between the 2 operatign lever cams and prevents that more than one function is operated at one time. Dicounted pricing offered when ordering more than 1 part - see top of X-200SD.
1 availalbe
$ 9.00
31. AKAI X-2000SD Pot Metal Cam - FF/REW. This part is commonly also referred to as: pot metal parts, bearings , engagement lever/shaft boss, cast puter part, bushing, or aluminum rocker part, that is on the shaft of the knob. This particular part is the primary cam for the fast forward / rewind lever. On many AKAI machines this part gets brittle and eventually shatters leaving the machine unoperable. Many people had to junk their AKAI decks due to parts obsolet. As this part fails on about 50% of the machines, it is highly saught after. Only 1 availalbe - get it before some one else will! These parts are geting scarce. Dicounted pricing offered when ordering more than 1 part - see top of X-200SD.
$ 75.00
32. AKAI X-2000SD Pot Metal Cam - Secondary. This part is commonly also referred to as: pot metal parts, bearings , engagement lever/shaft boss, cast puter part, bushing, or aluminum rocker part, that is on the shaft of the knob. This particular part is the secodary cam. On many AKAI machines this part gets brittle and eventually shatters leaving the machine unoperable. Many people had to junk their AKAI decks due to parts obsolet. As this part fails on about 50% of the machines, it is highly saught after. Only 1 availalbe - get it before some one else will! These parts are geting scarce. Dicounted pricing offered when ordering more than 1 part - see top of X-200SD.
$ 45.00
33. AKAI X-2000SD Run sensor - tape player. This is the photo cell sensor assebly consisting of a photo resistor and a PCB. It' sfucntion is to sense if the cassette deck is running. 1 availalbe
$ 18.00
34. AKAI X-2000SD Track Changer - Solenoid + Plunger. This solenoid advances the tracks on the 8 Track player and is used in all AKAI Decks tha tprovide an 8 Track player, includign th efamous X-1800SD. Part includes plunger with pin, mounting screws and c-clip. 1 availalbe
$ 15.00
35. AKAI X-2000SD Relais - Amplifier PCB. This Relais was located on the main amplifier PCB; Contacts: 2 x normally closed, 1500 Ohms, TECK-32 K A, 1 availalbe
$ 8.00
36. AKAI X-2000SD Relais - Cassette Control PCB. This Relais was located on the cassette deck PCB; Contacts: 4 x SPDT, OMRON type MY4-0-AD3 DC 6V, 1 availalbe
$ 12.00
37. AKAI X-2000SD Knob, inner. This is the inner knob of the volume/tone control. Solid body alluminum with set screw, black, slight corrosion (visible only upon close inspection) otherwise good, 2 available, sold as: 1 each. @ $ 25.00 ea. (discount applies, if buying several knobs, see top)
38. AKAI X-2000SD Knob, outer. This is the outer ring of the knob for the volume/tone control. Solid body alluminum with set screw, black, slight corrosion (visible only upon close inspection) otherwise good, 2 available, sold as: 1 each. @ $ 25.00 ea. (discount applies, if buying several knobs, see top)

39. AKAI X-2000SD Knob, PAUSE. This is the knob of the lever that sets th emachine into PAUSE mode. Solid body alluminum with set screw, black, slight corrosion (visible only upon close inspection) otherwise good, 2 available, sold as: 1 each. @ $ 25.00 ea. (discount applies, if buying several knobs, see top)

40. AKAI X-2000SD LEVER, Cassette Deck. This is the the lever that operates functions on the cassette deck. Solid body alluminum with set screw, black, slight corrosion (visible only upon close inspection) otherwise good, 2 available, sold as: 1 each. @ $ 25.00 ea. (discount applies, if buying several knobs, see top)

41. AKAI X-2000SD LEVER, Reel to Reel This is the the lever that operates functions on the Reel to Reel deck. Mounting would fit other single motor AKAI decks, such as th eX-1800SD, but would look different. Solid body alluminum with set screw, black, slight corrosion (visible only upon close inspection) otherwise good, 2 available, sold as: 1 each. @ ~~$ 28.00~~ ea. SOLD OUT!
42. AKAI X-2000SD Integrated Circuit: AA072. This is the custom integrated circuit (likely comprised of capacitors and resostors), made by Taiyo and is labeled as: AA072 with a number on back of: 5404-N, 2 available (each looks different: organge plastic case, or: dipped green - specify which one you want, was located on the main amplifier PCB, sold as: 1 each. @ $ ~~18.00~~ ea. SOLD OUT!

- cntinued: --->>>

43. AKAI X-2000SD Record / Playback Head, Cassette Deck. This ir the R/P head of the cassette of thsi unit; Used with some sings of wear, but wear is even and it should have plenty of life left and perform well. Stereo, 1 availalbe. There are several factors that determine heads and a close match even with identical impedances will always be difficult, so a replacement with a different head than the original will likely result in poor sound quality. Get this original head, while still available! $ 35.00

44. AKAI X-2000SD Erase Head, Cassette Deck. This ir the erase head of the cassette of thsi unit; godd condition, 1 availalbe. There are several factors that determine heads and a close match will always be difficult, so a replacement with a different head than the original will likely result in poor quality recordings. Get this original head, while still available! $ 20.00

45. AKAI X-2000SD Micro Switch. Due to space limitations 2 items combined into 1 order number. These are both microswitches used in the X-200SD and ohter decks, where the green (#45B) operates with lighter force, while the red (#45A) requires heavier force. Replace with the original color from the switch that needs replacement (please specify which color you need: A=red, B=green!), 1 avaailalbe each color, sold as: 1 each. @ $ 8.00 ea. (discount applies, if buying several knobs, see top)
#45A = RED
#45B = GREEN
46. AKAI X-2000SD Coils. Due to space limitations 2 items combined into 1 order number. These are both coils, where the upper is a 2 connector coil (marked with 333 - order number 46A) and the other is the bias oscillator coil (multiple pins - order number #46B) 1 avaailalbe each, sold as: 1 each. @ ea.
#46A = 2 Pin coil #333 $ 8.00
#46B Bias oscillator coil $ 25.00
47. AKAI X-2000SD Micro Switch, small, brown. SPST, 2 avaailalbe, sold as: 1 each. @ $ 8.00 ea. (discount applies, if buying several knobs, see top)

Reel to Reel Decks (-Continued):

TEAC TZ-612
10 1/2" Tape Reel Hub Adapters.

-These adapters are used to mount 10" reels on decks that are equipped wit the standard 7" reel mount, but sizewise can handle 10.5" tapes.

While these parts are made by TEAC to fit Teac decks, such as the 3300SX and many others, these adapters should fit almost any machine made by various manufactueres, as these fit any mechaism that would mount 7" reels. Only 1 pair availalbe and once sold gone. Excellent physical condition.

Get these while still availalbe - Very hard to find!

1 Pair of TEAC TZ-612 10" Reel Hub Adapters - (Set of 2 Adapters) $ 149.00

Please note: the Paypal shopping cart likely will charge you a higher fee for shipping than necessary. I will calculate the actual shipping charges (US nationwide arround $9 - $13, International about $14.00-$16.00 and refund the difference when shipping. Only 1 pair availalbe and once sold gone.
Once these adapters have sold I will remove above option to pay via the shopping cart.)

Crown 700 SX
Professional 10" Reel to Reel Recorder - Solid State.

-Not available: Any parts. Only a xerox copy of the complete service manual for this machine - pages somewhat out of order (as not numbered), but complete and includes model descriptions, factory history, module schematics and allignement precedures.
Please inquire

TEAC A-2050
Stereo Open Reel Recorder w/ auto reverse.

Picture of all available 2050 parts
-Available: Amplifier module - working stadn alone - great outboards gear! (Need a vintage Mic-Pre? - View this unit HERE!) Power Transformer: FR-210 / 56152-2, Drive Motor w/ spare conversion pulley, capstan flywheel, complete head assembly with play lever, Control relay PCB (3 relays on it), bias oscillator PCB, Main solenoid, head cover upper, head cover lower, 1 rubber reel fastener, tape hub drive assemblies, 2 rubber tape hub covers, The wooden case (good cond.) and the faceplate / Front Pannel. I have a photo of all parts, please inquire.

-Not available: Any other parts than listed above.

For any available parts please inquire by
description

Revere Cartridge Tape Player (model unkbown)
Propriotory stereo tape cartridge reording and palyback system, tube amplified.

-Available: Main motor

-Not available: Any parts other than the main motor.

Please inquire

Stereo Receivers, Vintage

Marantz 1530
Stereo Receiver

+ Marantz 22XX Knobs

-Available: Face plate, knobs, buttons, meters, different PCBs and modules, Transformer, etc. Knobs / Buttons will work for many of the 22XX series (2230, 2250, 2265, 2260 etc.). The knobs are shown here: here For other parts please inquire.

More Vintage Audio Knobs availalbe here

For parts please inquire by description

•Also available:
Obsolete Repair Parts for UHER Pro Cassette Decks

Tube Amplifier and Organ Parts

Synthesizers / Samplers

Akai S1000 S2000
digital MIDI samplers.

-Available: 1 SCSI ZIP Drive, internal available, if wanting to modify your unit to work with an internal ZIP drive. Will be mounted instead of the floppy drive. I have modified several units sucessfully Now in addition, I also offer to modify S2000 units to work with an internal Flash drives. Please Inquire

SCSI Cables HERE!

MOOG Taurus - Bass Synth

-Available: Pedal Key tops: (used good)
A larger JPG of Pedal Tops here!

Full Note (brown) $15.00 ea.

Half Note (black) $12.00 ea..

-Not available: Anything else.

More Keyboard, sytnth and organ parts

•Also available:

Vintage 80's Computers

Obsolete Repair Parts for UHER Pro Cassette Decks

Tube Amplifier and Organ Parts

PACKAGE DEALS or DISCOUNTS given, when buying several items. (If using the shoppong cart I will refund the amount for yoru discount). You are welcome to make offers with your inquiries as well, but I reserve the right to kindly refuse, or to ignore your inquiry, if unreasonable. It takes tremendouds time take machines in good condition apart, to maintian web and inventory. Please consider that I provide obsolete parts services in the frame work of making a living.

Turn Tables: > Turntable Belts and more Parts!

Turntable Dust Cover
Llikely will fit many turntables, but came from Fisher MT-6360,

This Dust cover is in good to excellent condition with the usual fine scratches etc due to the age. Replace or install a dustcover on your turntable. Dimensions are: (aprox.) 17" x 13" x 2" (slightly wider at the bottom, narrower on the top)

The dust cover includes removable springloaded mounting hinges and it shoud not be very hard to modify it to fit different turntables.

1 Fisher MT-6360 Dustcover $ 35.00

Dual 1258
Automatic Belt driven 33/45 RPM Turn Table

-Available: Platter, rubber mat, Motor, Pitch adjustment knob, pitch adjustment belt,, counter weight, Chassis to case mounting springs (used in many Dual models!). Many of the here listed parts are compatible with other simmilar models.

-Not vailable: All not listed above. Please do not inquire for unavailable parts.

For any above available parts please inquire by description

Marantz 1020
Semi-Automatic Belt driven 33/45 RPM Turn Table

-Available: Motor (w. pulley and all mounting hardware), Motor cover (black plastic part - insert at bottom plate; Mechanical actuator plastic parts with ball bearing; Arm return gear w/ mounting screws (complete.); All push buttons (with black mechanical plastic parts attached to them, Platter bearing (includes the platter mounting shaft; power switch assembly w/ mounting hardware; rubber feet (each or the set of 4); Complete tone arm assembly w/ arm rest, all mechanical parts, wiring (This tone arm assembly is a complete case cut-out and includes the complete plastic cut from the case and the arm bearing. (Inquire for photots if unclear!) This assembly can be used to build a turntable from scratch as the arm is complete with anything imaginable (tone arm includes the counter weigth, the head shell, the wiring, but does not include a cartridge.

-Not vailable: Platter, Platter ruber and all not listed above. Please do not inquire for unavailable parts.

For any above available parts please inquire by description

Silvertone Syntronic 2067 / 2068
Vintage Stereo Record Changer

-Available: Owners Manual, Service Manual w/parts list, 45 RPM changer adapter w/ mounting hardware, 3 extra stylie.

inquire fro what you need form the above.

More Turntable Parts HERE!

Vintage Radios

Zenith Transoceanic
Vintage Shord Wave world Radio

-Not available: Any of the wooden case parts, wave magnet antenna. Faceplate, handle, knobs, brass, antenna - have sold!

-Available:: Dial indicator plate, dial pointer, speaker (#343302 / 40CZ668), trannsformer (#66839), chasis and electronic parts, battery to chasis connector. All other parts not availalbe.

Buy Dial Plate and Dial Pointer (The plate behind the face Plate, plus the dia indicator needle = 1 set of plate and pointer) for $20.00

A JPG of available parts here!
Please note, that most parts have sold, see above!

-Inquire about: (These items are not shown): electronics Chassis and electronic parts from Zenith Transoceanic, Battery connector, Speaker (is in bad shape but may work)

More Detailled Info on Zenith Transoceanic Models

Synthesizers / Samplers

- Check Our TEST Equipment - HERE! -

• Buy • Top • Garage Main • Listen to Music by Rising Star • Home • Web Design by Rising Star •