
Vintage 40 Mb Ext. SCSI Hard Drive |
Handspring VisorPhone Wireless PDA Accessory Part number 02-0119-00 |
||||||||
| Get a replacement hard drive for your vintage sampler, synth or music system The Hard drive inside the Ehman case is a Seagate ST-251N SCSI Hard Drive From a time when 40Mb of hard drive space was an expensive quality item! The drive has a selectable SCSI ID switch to assign the SCSI ID and internal termination resistors behind a plexiglass window (top right) that can be removed. The drive dates March 9 1991 and I tested it with a series of runs of sequential, butterfly and random tests, which it all passed with zero errors. I also was writing 40 Mb of data to and from the drive to test it furhter which passed just fine. Having worked with modern computer stuff so long: this drive is loud! The exterior is in great shape as well except for a few minor dings and scratches. ![]() Photo by © Rising Star Lot: 1 External 40 Mb vintage SCSI Hard Drive with internal termination (removable) and SCSI ID selector as shown Price: $39.00 Inquire Secure and Easy Payment through Paypal possible. SCSI Cables below! |
Transforms Visor handhelds into a communications tool - a dual-band world phone and a wireless modem - allowing to wirelessly make phone calls, check email, surf the web, and more! No software needed - snaps into Springboard expansion slot. Integrates with Visor handheld address book for direct dial capability and caller ID information. * Alows to set up conference calls from the Visorphone and allows to invite new callers into the conference. Sends SMS text messages. Operates as a phone and a handheld simultaneously - allows to check calendar or look up a numbers, etc., while using the VisorPhone ![]() Photo © Rising Star For more information about the specs. for this device, please visit www.web.palm.com |
||||||||
This is the wireless / cell phone module for Handspring Visor PDAs. Turn your handheld into a phone. Connect through wireless network services to the Worldwide Web. Great to check e-mails, etc... while on the go. This unit supplies it's own battery, which does not require a separate charger, as it charges when the visor PDA is charged. The above photo - as with ll photos on my web site - shows the actual item. |
Condition: Supposed to be working - but I do not have a PDA to test it - so it is sold "AS-IS" Lot: 1 Handspring VisorPhone PDA Accessory Original Part number 02-0119-00,, 1 SIMM card (as shown) and 1 battery. Price: SOLD! |
||||||||
| This page designed by © Rising Star |
|||||||||
Commodore C 64 + Commodore C 128 |
Monitor + SCSI Cables |
||||||||
| Computers, Accesories and Parts. Floppy / Printer Cables ![]() Photo © Rising Star I have 2 Original Vintage Cables that can be used either as a floppy or a printer cable on the serial port of Commodore C64 / C128 computers C64 / C128 Floppy Drive / Printer Cable - 3 1/2 ft. 3 availalbe - please don't order more than availalbe - over payment will be refunded!, Price: $15.00 Condition: Used, good. Get it while still available. I only have 1 of these! C64 / C128 Floppy Drive / Printer Cable - 6 ft. Price: $20.00 Condition: Used, good. SOLD OUT! |
![]() Photo © Rising Star Inquire for larger images if in doubt about size, pin configurations etc. Only 1 availalbe each - please don't order more - over payment will be refunded!, 1) Sun Monitor Cable, also works with SONY GDM series monitors. DB type plugs with 3 inteegrated shielded connectors, about 3 ft. long. Teh plugs of this cable are marked with: 530-1870-01 Rev B 0843. I had to buy once one of these and had to pay $65 for it. A great steal at only $25.00 Condition: Used. Get it while still available. I only have 1 of these! 2) SCSI splitter? I have not used SCSI for a while, but I believe this is a dual chanel to single ports SCSI splitter. One end has a wide male plug, the othe ends 2 narrow SCSI 2 female plugs. All plugs are quality shielded metal. This adapter is labelled with: (on th emain plug): Compaq Spare 142159-001 142140-001 F 101109 5283. The smaller female connectros are labelled with: Port 1, and the other Port 2 Price: $35.00 Condition: Used. Get it while still available. I only have 1 of these! 3) SCSI 2 cable - 1 ft. 2 male SCSI 2 plugs - about 1 ft. in length, Cable made in the USA by Hewlett Packard, Part number printed on the plugs: 8120-5547, numbering printed on a label mounted on the cable: 8120-5547 HEG 3098 REV D Price: $20.00 Condition: Used. Get it while still available. I only have 1 of these! 4) SCSI 2 to SCSI 3 cable - 6 ft. 2 male SCSI plugs narrow SCSI 2 and SCSI3- about 16 ft. in length, Cable made with quality metal plugs, numbering printed on a label mounted on the cable: Compaq 199629-002 E 10109 5265 Spare 189636-002 Price: $25.00 Condition: Used. Get it while still available. I only have 1 of these! 5) SCSI 2 to Sub miniature SCSI connector. 2 male SCSI plugs narrow SCSI 2 and Sub-Miniature SCSI, 1 ft. in length, Cable made by Hewlett Packard (Marked), Part number printed on the plugs: 5183-3485 90 Ohm SCSI, numbering printed on a label mounted on the cable: 5183-3485 Rev D 9818 d Price: $25.00 Condition: Used. Get it while still available. I only have 1 of these! 6) SCSI 2 cable - 3 ft. 2 male SCSI 2 plugs - about 1 ft. in length, Cable made in the USA by Hewlett Packard, Part number printed on the plugs: 8120-5548, numbering printed on a label mounted on the cable: L2908A REV D M/D 96/38 Price: $20.00 Condition: Used. Get it while still available. I only have 1 of these! 7) NOT SHOWN! Vintage Apple PowerBook SCSI Adapter. Plugs into the PowerBook SCSI port (up to model Lombard G3 - possibly others - haven't followed developments since then.) to provide 1 female DB 25 SCSI 1 port. Adapter to be used with external SCSI devices, does not provide "docking mode". Labelled as "Media Vision" Price: $20.00 Condition: Used. Get it while still available. I only have 1 of these! Secure and Easy Payment through Paypal. Inquire for more Info / Larger Images |
||||||||
| This page designed by © Rising Star |
|||||||||